1.Applications
Primarily used for overhead service drop applications,such as:street lighting.outdoor lighting and temporary service for construction.To be used at voltages of 600v phase-to-phase or less and at at conductor temperatures not to exceed 75℃ for polyethylene(PE) insulated conductors or 90℃ cross-linked polyethylene(XLPE) insulated conductors.
Overhead insulated cable may be installed in the streets with dense trees close to the buildings,site of urban construction and lead to transformer.It is especially for an old city,which has densely buildings,densely population and narrow streets.
2.Rated voltage:
0.6/1kv or 6/10kv
3.Insulation material:
PE or XLPE or PVC or as the customer's demands;
4.Conductor:
Phase Conductor | Bare Neutral Messenger |
AAC | AAC |
ACSR | |
Alloy |
5.Service Drop Cable meets or exceeds the following specifications:
1).Aluminum Wire,1350-H19 for Electrical Purposes;
2).Aluminum Conductors,Concentric-Lay-Stranded;
3).Aluminum Conductor,Concentric-Lay-Stranded,Coated Steel Reinforced(ACSR);
4).Concentric-Lay-Stranded 6201-T81 Conductors;
5).Service drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474;
6.Cable's Characteristics:
1).Max.admissible long time operating to conductor:
PVC or PE insulated should not exceed 70℃,XLPE insulated should not exceed 90℃;
2).Installing temperature should not be below -20℃;
3).Admissible bending radius:
When overall-diameter(D)is less than 25mm,it should be not less than 4D;
When overall-diameter(D) is 25mm or more,it should be not less than 6D;